PLEXIGLAS® LED

Specialty molding compounds for efficient lighting engineering applications in combination with
LEDs. There is a choice of products either for edge or backlighting without any disturbing hot spots.

 

PLEXIGLAS® LED

FOR EDGE LIGHTING
Components made from the molding compounds of the LD range appear crystal-clear and transparent when unlit. These molding compounds have been optimized for edge lighting and for guiding light across differently sized areas. No additional diffusion films or microstructures are required on the component surface in order to achieve uniform light output over the entire surface.


Possible applications are ambient lighting, light guides without a decoupling structure, area lighting and light curtains.

 

FOR BACKLIGHTING
Molding compound colors for uniform light distribution when backlit with strong LED light, combined with high transmission, and without any disturbing hotspots (spots of light). These properties make it possible to reduce the spacing required between the cover and the LED light source, and to optimize the wall thickness of the component.

Downloads