PLEXIGLAS® LED

Products

FOR LED LIGHTING


Specialty molding compounds for efficient lighting engineering applications in combination with LEDs. There is a choice of products for edge lighting with maximum transmission or for back lighting without any distrurbing hot spots.


PLEXIGLAS® LED for edge lighting
Components made from the molding compounds of the LD range appear crystal-clear and transparent when unlit. These molding compounds have been optimized for edge lighting and for guiding light across differently sized areas. No additional diffusion films or microstructures are required on the component surface in order to achieve uniform light output over the entire surface.
  • PLEXIGLAS® LED LD12
  • PLEXIGLAS® LED LD24
  • PLEXIGLAS® LED LD48
  • PLEXIGLAS® LED LD96
Available as PLEXIGLAS® 8N molding compound.
PLEXIGLAS® LED for backlighting
Molding compound colors for uniform light distribution when backlit with strong LED light, combined with high transmission, and without any disturbing hotspots (spots of light). These properties make it possible to
reduce the spacing required between the cover and the LED light source, and to optimize the wall thickness of the component.
  • PLEXIGLAS® LED White 0V606
    Molding compounds made from this special color appear white in incident light.
  • PLEXIGLAS® LED White 0V200
    Special color for higher transmission, while retaining the light-diffusing properties.

Both are available in grades PLEXIGLAS® 7N, 7H and zk6BR

Product information